SETTING UP YOUR EXPERIMENT
	Add and copy experiments.
	If you want to run more than one experiment on one sample (for example, both a 1H and a 13C), highlight the first run, then click on the small "Add" button at the bottom of the screen. To add more than one experiment for this sample, simply change the number at the right of the button. Roll your mouse over the screen below to compare the addition of one and two experiments. Note that all of the sample information (except for the experiment) is copied (click here for larger screens):
	Be aware that, even if you have access to experiments with several nuclides (such as 1H, 13C, 29Si and 31P) you may not be able combine them into one sample entry. Some instruments systems are capable of automatically changing the nuclide to be observed; others are not. Check with your facility manager. The NMR-CTP system does NOT have this capability; you cannot run nuclides other than 1H and 13C without making special arrangements.
	If you want to run the same experiment or experiments on more than one sample, highlight the selections you wish to copy, select the number of copies you want, and hit the small "Copy" button directly under the "Add" button (a larger screen is here):
	You can easily delete any unwanted experiments by highlighting those lines, then clicking the "Delete" key.