| LOADING THE SPECTROMETER | ||||
| Load samples into the NMR Case: | ||||
| First, make sure that the pointer is aligned with the "Start" position, as shown below: | ||||
 |
||||
|
Next, place your first sample into the hole labeled "01", as illustrated. Make sure that you note the identification, solvent, and any other relevant information for your sample. WARNING: Do not try to force your first sample into the "Start" position (it will not fit easily); this slot is used for any sample that may be already in the magnet. |
||||
 |
||||
| Load any additional samples into the subsequent slots, "02", "03", etc. | ||||